Ruijie Networks RG-S2600E Series Cli Reference Manual page 191

S2600E/P CLI Reference Guide
Command
mode
Usage
guidelines
Examples
Related
commands
10.1.6 spanning-tree mode
Use this command to set the STP version in the global configuration mode. Use
the no form of the command to restore the version of the spanning-tree to the
default setting.
spanning-tree mode [stp | rstp | mstp]
no spanning-tree mode
Parameter
description
Default
configuration
Chapter 10 MSTP Configuration Commands
Global configuration mode.
In the region, the BPDU message sent by the root bridge
includes a Hot Count field. When the BPDU message
passes a device, the Hop Count is decreased by 1 until it
reaches 0, which indicates the BPDU message times out.
The device will drop the BPDU message whose Hop
Count is 0.
Changing the max-hops command affects all instances.
This example shows how to set the max-hops of the
spanning tree to 10 for all instances:
Ruijie(config)# spanning-tree max-hops 10
You can verify your setting by entering the show
spanning-tree mst
configuration mode.
Command
show
spanning-tree
Parameter Description
Spanning tree protocol(IEEE 802.1d)
stp
Rapid spanning tree protocol(IEEE
rstp
802.1w)
Multiple spanning tree protocol(IEEE
mstp
802.1s)
MSTP version.
command in the
Description
Show the MSTP information.
privileged