Ruijie Networks RG-S2600E Series Cli Reference Manual page 478

S2600E CLI Reference Guide
1
1.1 ID Authentication Related
Command
1.1.1 aaa authentication dot1x
Use this command to enable AAA authentication 802.1x and configure the 802.1x user
authentication method list. The no form of this command is used to delete the 802.1x user
authentication method list.
aaa authentication dot1x {default | list-name} method1 [method2...]
no aaa authentication dot1x {default | list-name}
Parameter
default
list-name
Parameter
description
method
Default
Chapter 1 AAA Configuration Commands
AAA
Commands
Description
When this parameter is used, the following defined
802.1x user authentication method list is used as the
default method for user authentication.
Name of the 802.1x user authentication method list,
which could be any character string.
It must be one of the keywords listed in the following
table. One method list can contain up to four methods.
Keyword
local
none
group
N/A
Configuration
Description
Use the local user name database for
authentication.
Do not perform authentication.
Use the server group for authentication.
At present, the RADIUS server group is
supported.