Ruijie Networks RG-S2600E Series Cli Reference Manual page 628

S2600E CLI Reference Guide
Configuration
Example
Related
Commands
Platform
Description
5.1.7 http redirect timeout
This command is used to set the timeout for the redirection connection
maintenance. The no form of this command is used to reset the timeout to
3 seconds.
http redirect timeout seconds
no http redirect timeout
Parameter
Description
Default
Configuration
Command
Mode
Use Guide
Chapter 5 Web Authentication Configuration Commands
Example 1: Set the maximum number of HTTP sessions
originated by an unauthenticated user to 4.
Ruijie(config)# http redirect session-limit 4
Command
show http redirect
None
Parameter
seconds
3 seconds.
Global configuration mode
This command is used to set the timeout for the redirection
connection maintenance.
succeeds, the redirection connection is maintained until the user
sends an HTTP GET/HEAD packet and the system returns an
HTTP redirection packet. This timeout is set to prevent users from
Description
View the HTTP redirection configuration.
Description
Set the timeout for the redirection
connection maintenance.
It is in the range of 1 to 10.
After the three-way handshake