Ruijie Networks RG-S2600E Series Cli Reference Manual page 657

S2600E CLI Reference Guide
Related
Commands
Platform
Description
5.6 Showing Default
Parameters
Configuration
5.7 Showing Prompt for
Feedback
1. If the trusted port of DHCP snooping has been enabled on the device
2. If the destination port of SPAN has been enabled on the device port,
Chapter 5 Web Authentication Configuration Commands
Command
web-auth help
None
port, the following prompt should be shown when enabling the
web-auth controlled port.
the following prompt should be shown when enabling the web-auth
controlled port.
Description
Show the typical
information of web-auth modules.
configuration