Show Line; Show Reload - Ruijie Networks RG-S2600E Series Cli Reference Manual

S2600E/P CLI Reference Guide
Commands
Related
commands
2.3.3
To show the configuration of a line, execute the show line command in the
privileged mode.
show line {console line-num | vty line-num | line-num}
Parameter
description
Command
mode
Usage
guidelines
Examples
2.3.4
To show the restart settings of the system, execute the show reload command
in the privileged EXEC mode.

show reload

Command
clock set

show line

Parameter
console
vty
line-num
Privileged mode.
This command shows the configuration information of a line.
The following example shows the configuration of console port:
Ruijie# show line console 0
CON Type
* 0 CON
Line 0, Location: "", Type: "vt100"
Length: 24 lines, Width: 79 columns
Special Chars: Escape Disconnect Activation
Timeouts:
History is enabled, history size is 10.
Total input: 53564 bytes
Total output: 395756 bytes
Data overflow: 27697 bytes
stop rx interrupt: 0 times
show reload
Chapter 2 Switch Management Configuration
Description
Set the system clock.
Description
Show the configuration of a console
line.
Show the configuration of a vty line.
Number of the line
speed Overruns
9600 45927
^^x none ^M
Idle EXEC Idle Session
never never