Ruijie Networks RG-S2600E Series Cli Reference Manual page 851

S2600E CLI Reference Guide
Examples
Related
commands
Chapter 15 NFPP Configuration Commands
Ruijie# show nfpp dhcp-guard summary
（Format of column Rate-limit and Attack-threshold is p
er-src-ip/per-src-mac/per-port.）
Interface Status
Attack-threshold
Global Enable 300
Gi 0/1 Enable 180
Gi 0/2 Disable 200
Maximum count of monitored hosts: 1000
Monitor period：300s
Field Description
Interface(Global) Global configuration
Status Enable/Disable the anti-attack
function.
Rate-limit In the format of the rate-limit
threshold for the source IP address/
the rate-limit threshold for the
source MAC address/ the rate-limit
threshold for the port
Attack-threshold In the same format as the rate-limit.
- No configuration.
Command
dhcp-guard
attack-threshold
dhcp-guard enable
dhcp-guard
isolate-period
dhcp-guard
monitor-period
dhcp-guard
monitored-host-li
mit
dhcp-guard
rate-limit
Isolate-period
-/5/150
-/6/-
-/5/30
Description
Set the global attack threshold.
Enable the DHCP
function.
Set the global isolate time.
Set the monitor period.
Set the maximum number of the
monitored hosts.
Set the global rate-limit threshold.
Rate-limit
-/10/300
-/8/-
-/10/50
anti-attack