Ruijie Networks RG-S2600E Series Cli Reference Manual page 55

S2600E/P CLI Reference Guide
3
3.1 Related Configuration
Commands
3.1.1
In global configuration mode, use this command to generate a public key on the
SSH server:
crypto key generate {rsa|dsa}
Parameter
description
Default
configuration
Command
mode
Usage
guidelines
Chapter 3 SSH Configuration Commands
SSH
Commands
crypto key
generate
Parameter
rsa
dsa
By default, the SSH server does not generate a public
key.
Global configuration mode.
When you need to enable the SSH Server service, use this
command to generate a public key on the SSH server and
enable the SSH SERVER service by command enable
service ssh-server at the same time. SSH 1 uses the RSA
key; SSH 2 uses the RSA or DSA key. Therefore, if a RSA
key has been generated, both SSH1 and SSH2 can use it. If
only a DSA key is generated, only SSH2 can use it.
A key can be deleted by using the
crypto key zeroize command. The no
crypto key generate command is not
Caution
available.
Configuration
Description
Generate an RSA key.
Generate a DSA key.