Ruijie Networks RG-S2600E Series Cli Reference Manual page 794

S2600E CLI Reference Guide
dhcp-guard attack-threshold { per-src-mac | per-port} pps
Parameter
description
Default
Settings
Command
mode
Usage
guidelines
Examples
Related
commands
15.3.2 dhcp-guard enable
Use this command to enable the DHCP anti-attack function.
dhcp-guard enable
Chapter 15 NFPP Configuration Commands
Parameter Description
Set the attack threshold for each
per-src-mac
source MAC address.
per-port Set the attack threshold for each port.
Set the attack threshold, in pps. The
pps
valid range is [1,9999].
By default, the attack threshold for each source MAC
address is 10pps; and the attack threshold for each port is
300pps.
NFPP configuration mode.
N/A.
Ruijie(config)# nfpp
Ruijie(config-nfpp)#
per-src-mac 15
Ruijie(config-nfpp)# dhcp-guard attack-threshold
per-port 200
Command
nfpp dhcp-guard
policy
show nfpp dhcp-guard
summary
show nfpp dhcp-guard
hosts
clear nfpp dhcp-guard
hosts
dhcp-guard attack-threshold
Description
Show the rate-limit threshold
and attack threshold.
Show the configurations.
Show the monitored host list.
Clear the monitored host.