Ruijie Networks RG-S2600E Series Cli Reference Manual page 22

S2600E/P CLI Reference Guide
Commands
Related
commands
2.1.12
To support the use of the lock command at the terminal, execute the lockable
command in the line configuration mode. The terminal doesn't support the lock
command, by default.Use the no command to cancel the setting.
lockable
no lockable
Parameter
description
Command
mode
Usage
guidelines
Examples
Related
commands
Command
lockable
lockable
N/A.
Line configuration mode.
This command is used to support the terminal lock function
in corresponding line. To lock the terminal, execute the
lock command in the EXEC mode.
The example below enables the terminal lock function at
the console port and locks the console:
Ruijie(config)# line console 0
Ruijie(config-line)# lockable
Ruijie(config-line)# end
Ruijie# lock
Password: <password>
Again: <password>
Locked
Password: <password>
Ruijie#
Command
lock
Chapter 2 Switch Management Configuration
Description
Set to support the terminal lock
function in the line.
Description
Lock the terminal.