Show Link State Group - Ruijie Networks RG-S2600E Series Cli Reference Manual

S2600E CLI Reference Guide
Command
mode
Usage
guidelines
Examples
Related
commands
1.2 Showing and Monitoring Commands
1.2.1

show link state group

Use this command to show the information of a link state track group.
show link state group num
Parameter
description
Default
Command
mode
Examples
Chapter 1 REUP Configuration Commands
Interface configuration mode.
MSTP instance mapping can be used to modify the
mapping between an instance and a VLAN.
The following example configures VLAN load balancing on
dual links.
Ruijie(config)# interface gigabitEthernet 0/1
Ruijie(config-if)#
gigabitEthernet 0/2 prefer instance 1
Command
show interface
switchport backup
spanning-tree mst
configuration
Parameter Description
num ID of a link state track group.
None
Privileged EXEC mode.
The following example shows the link state track group:
Ruijie # show link state group
Link State Group:1 Status: Enabled, UP
Upstream Interfaces :Gi0/1(Up)
Downstream Interfaces :Gi0/3(Dwn), Gi0/4(Dwn)
switchport backup
Description
Show the configuration of dual-link
backup on the switch.
Configure MSTP instances.
interface