Ruijie Networks RG-S2600E Series Cli Reference Manual page 319

S2600E/P CLI Reference Guide
Commands
Default
configuration
Command
mode
Usage
guidelines
Examples
Related
commands
Platform
description
6.1.2 ip helper-address
Use this command to configure the destination server which the UDP broadcast
message will be forwarded to. Use the no form of this command to delete the
destination server.
ip helper-address address
no ip helper-address [address]
Parameter
description
Chapter 6 UDP-Helper Module Configuration
Forward the broadcast message from
port 49.
N/A.
Global configuration mode.
Enabling the UDP-Helper function will forward the
broadcast message of the UDP ports 69,53,37,137,138,49
without any additional configuration, by default.
Ruijie(config)# ip forward-protocol udp 134
Command
udp-helper enable
ip
forward-protocol
Currently, this command is supported on the RGOS10.1
and the later version.
Parameter Description
IP address of the destination server in
address
the
interface can support up to 20 server
Description
Enable the forwarding of the UDP
broadcast message.
Configure the UDP port to enalbe
forwarding.
dotted decimal format. Each