Banner Motd - Ruijie Networks RG-S2600E Series Cli Reference Manual

S2600E/P CLI Reference Guide
Commands
Usage
guidelines
Examples
2.2.2
To set the Message-of-the-Day (MOTD), run the banner motd command in the
global configuration mode. To delete the MOTD setting, run the no banner
motd command.
banner motd c message c
Parameter
description
Command
mode
Usage
guidelines
Examples
2.2.3
Use this command to set the startup main program filename for the device. The
no form of this command restores it to the default setting.
boot system url
no boot system
Parameter
description
This command sets the logging banner message, which is
displayed upon login.
terminating symbol will be discarded by the system.
The following example shows the configuration of logging
banner:
Ruijie(config)# banner login $ enter your password $

banner motd

Parameter
c
message
Global configuration mode.
This command sets the MOTD, which is displayed upon
login. The letters entered after the separator will be
discarded.
The following example shows the configuration of MOTD:
Ruijie(config)
Ruijie(config)# banner motd $ hello,world $
boot system
Parameter
url
Chapter 2 Switch Management Configuration
All characters behind the
Description
Separator of the MOTD. Delimiters are
not allowed in the MOTD.
Contents of an MOTD
Description
Address used for booting files.