Ruijie Networks RG-S2600E Series Cli Reference Manual page 819

S2600E CLI Reference Guide
15.5.9 nfpp icmp-guard enable
Use this command to enable the ICMP anti-attack function on the interface.
nfpp icmp-guard enable
Parameter
description
Default
Settings
Command
mode
Usage
guidelines
Examples
Related
commands
Chapter 15 NFPP Configuration Commands
icmp-guard
attack-threshold
nfpp icmp-guard
policy
show nfpp
icmp-guard hosts
Parameter Description
-
-
The ICMP anti-attack function is not enabled on the
interface.
Interface configuration mode.
The interface ICMP anti- attack configuration is prior to the
global configuration.
Ruijie(config)# interface G0/1
Ruijie(config-if)# nfpp icmp-guard enable
Command
icmp-guard enable
show nfpp
icmp-guard
summary
Set the global attack threshold.
Set the limit threshold and attack
threshold.
Show the monitored host.
Description
Enable the anti-ARP
function.
Show the configurations.
attack