Ruijie Networks RG-S2600E Series Cli Reference Manual page 790

S2600E CLI Reference Guide
Parameter
description
Default
Settings
Command
mode
Usage
guidelines
Examples
Related
commands
15.2.11 nfpp arp-guard
isolate-period
Use this command to set the isolate period in the interface configuration mode.
nfpp arp-guard isolate-period {seconds | permanent}
Parameter
description
Chapter 15 NFPP Configuration Commands
Parameter Description
-
-
The anti-ARP attack function is not enabled on the
interface.
Interface configuration mode.
The interface anti-ARP attack configuration is prior to the
global configuration.
Ruijie(config)# interface G0/1
Ruijie(config-if)# nfpp arp-guard enable
Command
arp-guard enable
show nfpp
arp-guard
summary
Parameter Description
Set the isolate period, in second. The
seconds
valid range is 0, or [30, 86400]. 0
indicates no isolation.
permanent
Permanent isolation.
Description
Enable the anti-ARP
function.
Show the configurations.
attack