Ruijie Networks RG-S2600E Series Cli Reference Manual page 35

S2600E/P CLI Reference Guide
Commands
Usage
guidelines
Examples
2.2.8
To set the prompt command, run the prompt command in the global
configuration mode. To delete the prompt setting, run the no prompt command.
prompt string
Parameter
description
Command
mode
Usage
guidelines
Examples
2.2.9
To restart the device system, execute the privileged user command reload.
reload [ text | in [ hh: ] mm [ text ] | at hh:mm [month day year ] [ text ] | cancel ]
Parameter
description
This hostname is mainly used to identify the device and is
taken as the username for the local device in the dialup
and CHAP authentication.
The example below configures the hostname of the device
as BeiJingAgenda:
Ruijie(config)# hostname BeiJingAgenda
BeiJingAgenda(config)#
prompt
Parameter
string
Global configuration mode.
If you have not set the prompt string, the prompt string is
the system name, which varies with the system name. The
prompt command is valid only in the EXEC mode.
Set the prompt string to rgnos:
Ruijie(config)# prompt rgnos
Ruijie(config)# end
rgnos
reload
Parameter
text
in mmm hh:mm
Chapter 2 Switch Management Configuration
Description
Character string
command. The maximum length is 32
letters.
Description
Cause to restart, 1-255 bytes
The system is restarted after specified
time interval.
of the prompt