Ruijie Networks RG-S2600E Series Cli Reference Manual page 594

S2600E CLI Reference Guide
commands
dot1x auth-mode
dot1x max-req
dot1x
port-control auto
dot1x
reauth-max
dot1x
re-authentication
dot1x timeout
quiet-period
dot1x timeout
re-authperiod
dot1x timeout
server-timeout
dot1x timeout
supp-timeout
dot1x timeout
tx-period
4.6.6 show dot1x port-control
Use this command to show the ports that participate in authentication.
show dot1x port-control [interface interface]
Parameter
Parameter
description
interface
N/A.
Default
Command
mode Privileged mode.
Usage
guidelines N/A.
Chapter 4 802.1X Configuration Commands
Set the 802.1x authentication mode.
Set the maximum number of
authentication request
retransmissions.
Set the port to participate in
authentication.
Set the maximum number of the
supplicant re-authentications.
Set the re-authentication attribute.
Set the time the device waits before
reauthentication.
Set the re-authentication period for the
supplicant.
Set the authentication timeout
between the device and
authentication server.
Set the authentication timeout
between the device and the
supplicant.
Set the retransmission period.
Description
Specified interface