Ruijie Networks RG-S2600E Series Cli Reference Manual page 199

Table of Contents

Advertisement

S2600E/P CLI Reference Guide
10.1.14 spanning-tree portfast
Use this command to enable the portfast on the interface. You can use the
disabled option of this command to disable the portfast feature on the interface.
spanning-tree portfast [disabled]
Parameter
description
Default
configuration
Command
mode
Examples
Related
commands
10.1.15 spanning-tree portfast bpduguard default
Use this command to enable the GPDU guard globally. You can use the no form
of the command to disable the BPDU guard.
spanning-tree portfast bpduguard default
no spanning-tree portfast bpduguard default
Parameter
description
Default
configuration
Chapter 10 MSTP Configuration Commands
show
Show the STP configuration of the
spanning-tree
interface.
interface
Parameter
Description
Disable the portfast on the interface.
disabled
Disabled.
Interface configuration mode.
Ruijie(config)# interface gigabitethernet 1/1
Ruijie(config-if)# spanning-tree portfast
Command
show spanning-tree
interface
N/A.
Disabled.
Description
Show the STP configuration of the interface.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RG-S2600E Series and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents