Ruijie Networks RG-S2600E Series Cli Reference Manual page 838

S2600E CLI Reference Guide
Default
Settings
Command
mode
Usage
guidelines
Examples
Related
commands
15.8 NFPP Log Configuration
Commands
The NFPP log configuration commands include:
15.8.1 clear nfpp log
Use this command to clear the NFPP log buffer area.
clear nfpp log
Parameter
description
Default
Settings
Chapter 15 NFPP Configuration Commands
attack-threshold-pps
By default, the rate-limit threshold and the attack threshold
are not configured.
Interface configuration mode.
The attack threshold value shall be equal to or greater
than the rate-limit threshold.
Ruijie(config)# interface G 0/1
Ruijie(config-if)# nfpp define tcp policy per-src-ip 2 10
Ruijie(config-if)# nfpp define tcp policy per-port 50 100
Command
define-policy
show nfpp define
summary
Parameter Description
- -
N/A
Set the attack threshold with the
valid range of [1, 9999].
Description
Set the global rate-limit threshold
and attack threshold.
Show the user-defined anti-attack
configurations.