Ruijie Networks RG-S2600E Series Cli Reference Manual page 558

S2600E CLI Reference Guide
4.2.3 dot1x timeout
server-timeout
Use this command to set the authentication timeout between the device and the authentication
server. Use the no form of the command to restore it to the default setting.
dot1x timeout server-timeout seconds
no dot1x timeout server-timeout
Parameter
Parameter
description
seconds
Default 5 seconds.
Command
mode Global configuration mode.
Usage
guidelines Use show dot1x command to show 802.1X configuration.
The following example sets the authentication timeout of
the authentication server to 10s:
Ruijie# configure terminal
Ruijie(config)# dot1x timeout server-timeout 10
Ruijie(config)# end
Ruijie# show dot1x
802.1X Status:
Authentication mode:
Authed User Number:
Re-authen Enabled:
Examples
Re-authen Period:
Quiet Timer Period:
Tx Timer Period:
Supplicant Timeout:
Server Timeout:
Re-authen Max:
Maximum Request:
Filter Non-RG Supp:
Client Oline Probe:
Eapol Tag Enable:
Authorization Mode:
Chapter 4 802.1X Configuration Commands
Description
Authentication timeout between the
device and the authentication server.
The range is 0 to 65535 seconds.
Enabled
EAP-MD5
0
Disabled
1000 sec
1000 sec
3 sec
3 sec
10 sec
3 times
3 times
Disabled
Disabled
Disabled
Group Server