Ruijie Networks RG-S2600E Series Cli Reference Manual page 943

S2600E CLI Reference Guide
Related
commands
2.2.8 wrr-queue bandwidth
Use this command to set the weight ratio for the WRR algorithm. Use the no
form of the command to restore it to the default.
wrr-queue bandwidth weight1 ... weightn
no war-queue bandwidth
Parameter
description
Default
configuration
Command
mode
Examples
Related
commands
2.2.9 mls qos map cos-dscp
Use this command to map the CoS value to the DSCP value. Use the no form
of the command to disable the mapping.
mls qos map cos-dscp dscp1...dscp8
no mls qos map cos-dscp
Parameter
description
Chapter 2 QoS Configuration Command
show mls qos queuing
Parameter Description
Weight value specified for the output
queues. For the number of weights
weight1...weightn
and its range, see the default settings.
no Restore to the default value.
weight1: ...: weightn = 1:..:1
Global configuration mode
Ruijie(config)# wrr-queue bandwidth 1 2 3 4 5 6 7 8
show mls qos queuing
Parameter Description
dscp Specify the DSCP value.
no Restore to the default value.