Ruijie Networks RG-S2600E Series Cli Reference Manual page 28

S2600E/P CLI Reference Guide
Commands
Usage
guidelines
Examples
Related
commands
2.1.20
To set the local username, execute the global configuration mode command
username .
username name {nopassword | password { password | [0|7]
encrypted-password }} username name privilege privilege-level
no username name
Parameter
description
Command
mode
This command is used to log in a telnet server.
The example below commands telnet to 192.168.1.11, the
port uses the default value, and the source interface is
specified as Gi 0/1, the queried VRF route table is
specified as vpn1.
Ruijie# telnet
gigabitEthernet 0/1 /vrf vpn1
The example
2AAA:BBBB::CCCC
Ruijie# telnet 2AAA:BBBB::CCCC
Command
Ip
source-interface
show sessions
exit
username
Parameter
name
password
0|7
encrypted-password
privilege-level
Global configuration mode.
Chapter 2 Switch Management Configuration
192.168.1.11
below commands
Description
Specify the IP address of the
telnet
interface as the source address for
the Telnet connection.
Show the
Telnet sessions.
Exit current connection.
Description
Username
User password
Password encryption type, 0 for no
encryption, 7 for simple encryption
Password text
User bound privilege level
/source-interface
telnet to
currently established