Dhcp Configuration - Ruijie Networks RG-S2600E Series Cli Reference Manual

S2600E/P CLI Reference Guide
4
4.1 DHCP Configuration Related Command
4.1.1 ip address dhcp
Use this command to make the Ethernet interface or the PPP, HDLC and FR
encapsulated interface obtain the IP address information by the DHCP in the
interface configuration mode. The no form of this command can be used to
cancel this configuration.
ip address dhcp
no ip address dhcp
Default
Command
mode
Usage
guidelines
Examples
Chapter 4 DHCP Configuration Commands

DHCP Configuration

Commands
The interface cannot obtain the ID address by the DHCP by
default.
Interface configuration mode.
When requesting the IP address, the DHCP client of the
RGOS software also requires the DHCP server provide 5
configuration parameter information: 1) DHCP option 1,
client subnet mask, 2) DHCP option 3, it is the same as the
gateway information of the same subnet, 3) DHCP option
6, the DNS server information, 4) DHCP option 15, the
host suffix domain name, and 5) DHCP option 44, the
WINS server information.
The client of the RGOS software is allowed to obtain the
address on the PPP, FR or HDL link by the DHCP, which
should be supported by the server. At present, our server
can support this function.
The configuration example below makes the FastEthernet
0 port obtain the IP address automatically.