Ruijie Networks RG-S2600E Series Cli Reference Manual page 117

S2600E/P CLI Reference Guide
Commands
Command
mode
Usage
guidelines
Examples
Related
commands
Platform
description
2.1.14 snmp trap mac-notification
Use this command to enable the MAC address trap notification on the specified
interface. You can use The no form of the command to disable this function.
snmp trap mac-notification {added | removed}
no snmp trap mac-notification {added | removed}
Chapter 2 MAC Address Configuration
Global configuration mode.
A static MAC address has the same function as the
dynamic MAC address that the switch learns. Compared
with the dynamic MAC address, the static MAC address
will not be aged out. It can only be configured and removed
by manual. Even if the switch is reset, the static MAC
address will not be lost. A static MAC address shall not be
configured as a
mac-address-table static to display the static MAC
address. Use clear mac-address-table static to clear
static MAC address.
When the packet destined to 00d0 f800 073c arrives at
VLAN4, it will be forwarded to the specified port
gigabitethernet 1/1:
Ruijie(config)# mac-address-table static 00d0.f800.073c
vlan 4 interface gigabitethernet 1/1
Command
show
mac-address-table
static
clear
mac-address-table
static
-
multicast address.
Description
Show the static MAC address.
Clear the static MAC address.
Use
show