Ruijie Networks RG-S2600E Series Cli Reference Manual page 188

S2600E/P CLI Reference Guide
Usage
guidelines
Examples
Related
commands
10.1.2 spanning-tree bpdufilter
Use this command to enable BPDU filter on the interface. You can use the
enabled or disabled option of the command to enable or disable the BPDU
filter function on the interface.
spanning-tree bpdufilter [enabled | disabled]
Parameter
description
Default
configuration
Command
mode
Chapter 10 MSTP Configuration Commands
The values of forward-time, hello time and max-age are
interrelated. Modifying one of these three parameters will
affect the others. There is a restricted relationship among
the above three values.
2*(Hello Time+1.0snd) <= Max-Age Time <=
2*(Forward-Delay–1.0snd)
If the values do not according with the condition, the
settings do not work.
Enable the spanning-tree function:
Ruijie(config)# spanning-tree
Configure the BridgeForwardDelay:
Ruijie(config)# spanning-tree forward-time 10
Command
show spanning-tree
spanning-tree mst
cost
spanning-tree
tx-hold-count
Parameter
enabled
Disabled
Disabled.
Interface configuration mode.
Description
Show the global
configuration.
Set the PathCost of an STP
interface.
Set the global TxHoldCount of
STP.
Description
Enable BPDU filter
interface.
Disable BPDU filter
interface.
STP
on the
on the