Mode Commands - Ruijie Networks RG-S2600E Series Cli Reference Manual

S2600E CLI Reference Guide
10.1.8 ip dhcp snooping database
write-to-flash
Use this command to write the dynamic user information of the DHCP binding database into
flash in real time.
ip dhcp snooping database write-to-flash
Parameter
description
Default
Command
mode
Usage
guidelines
Examples
Related
commands
10.2 DHCP snooping Interface

Mode Commands

10.2.1 ip dhcp snooping suppression
Use this command to set the port to be the suppression status. The no form of this command
will set the port to be no suppression status.
[no] ip dhcp snooping trust
Parameter
description
Default
Chapter 10 DHCP Snooping Configuration Commands
N/A.
N/A.
Global configuration mode.
Use this command to write the dynamic user information of
the DHCP binding database into flash in real time.
The following is an example of writing the dynamic user
information of the DHCP binding database into flash.
Ruijie# configure terminal
Ruijie(config)# ip dhcp snooping database write-to-flash
Ruijie(config)# end
Ruijie#
N/A.
N/A.
Disabled