Policy Maps - Ruijie Networks RG-S2600E Series Cli Reference Manual

S2600E CLI Reference Guide
Related
commands
Platform
description
2.2.5

policy maps

Use the following command to create a policy map and enter the policy map
configuration mode
[no] policy-map policy-map-name
Use the following command to create the class map data classification used in
the policy map and enter into the data classification configuration mode.
[no] class class-map-name
Use the following command to set the ip_dscp value of the IP packets, which
does not take effect for non-IP packets.
set ip dscp new-dscp
no set ip dscp
Use the following command to set the cos value of the packets. With the
none-tos configured, the DSCP value of the packets will not be modified.
no set cos
Use the following command to limit the bandwidth and specify the method of
handling the excessive part.
Create the class-map naming cm-dscp and match the
DSCP 8,16,24 and exit the setting
Ruijie(config)# class-map cm-dscp
Ruijie(config-cmap)# match ip dscp 8 16 24
Ruijie(config-cmap)# exit
Command
show map
access-lists
show ip
access-lists
show
class-map
-
set cos new-cos [none-tos]
Chapter 2 QoS Configuration Command
Description
-
-
-