Ruijie Networks RG-S2600E Series Cli Reference Manual page 229

S2600E/P CLI Reference Guide
Related
commands
Platform
description
12.1.5 switchport mode uplink
Use this command to configure the interface as a uplink port.
switchport mode uplink
no switchport mode
Parameter
description
Default
configuration
Command
mode
Examples
Related
commands
Platform
description
12.1.6 switchport dot1q-tunnel allowed vlan
Use this command to configure the allowed VLAN of dot1q-tunnel.
switchport dot1q-tunnel allowed vlan [add] {tagged|untagged} v_list
switchport dot1q-tunnel allowed vlan remove v_list
no switchport dot1q-tunnel allowed vlan
Chapter 12 QinQ Configuration Commands
Command
show vlan
The software version must be RGOS10.1 and later.
Parameter
no
No uplink port is configured.
Interface configuration mode.
Here is an example of configuring the interface as a uplink
port.
Ruijie(config)# interface gigabitEthernet 0/1
Ruijie(config-if)# switchport mode up-link
Ruijie(config)# end
Command
show vlan
The software version must be RGOS10.1 and later.
Description
-
Description
Remove the settings.
Description
-