Ruijie Networks RG-S2600E Series Cli Reference Manual page 825

S2600E CLI Reference Guide
Parameter
description
Default
Settings
Command
mode
Usage
guidelines
Examples
Related
commands
15.6.5 nfpp nd-guard policy
Use this command to set the rate-limit threshold and the attack threshold.
nfpp nd-guard policy per-port {ns-na | rs | ra-redirect} rate-limit-pps attack-threshold-
pps
Parameter
description
Chapter 15 NFPP Configuration Commands
Parameter Description
-
-
The ND anti-attack function is not enabled on the interface.
Interface configuration mode.
The interface ND anti-attack configuration is prior to the
global configuration.
Ruijie(config)# interface G0/1
Ruijie(config-if)# nfpp nd-guard enable
Command
nd-guard enable
show nfpp
nd-guard
summary
Parameter
ns-na
rs
ra-redirect
rate-limit-pps
Description
Enable the ND anti- attack function.
Show the configurations.
Description
Set the neighbor request and
neighbor advertisement.
Set the router request.
Set the router advertisement and
the redirect packets.
Set the rate-limit threshold with the
valid range of [1, 9999].