Ruijie Networks RG-S2600E Series Cli Reference Manual page 579

S2600E CLI Reference Guide
Command
Global configuration mode.
mode
With this function enabled, the user that has passed the
Usage 802.1x authentication is permitted to move to other ports. If
guidelines this function is disabled, the user can not access the
network after moving to the new port.
Ruijie# configure terminal
Enter configuration commands, one per line. End with
Examples
CNTL/Z.
Ruijie(config)# dot1x mac-move permit
Ruijie(config)# end
Command
Related
commands
show dot1x
4.5.17 dot1x max-req
During interaction between the dot1x and the server, the dot1x will send a request to the server
again if it does not receive a response from the server within a certain period of time. Use this
command to set the maximum number of authentication requests sent to the server. Use the
no form of the command to restore it to the default value.
dot1x max-req count
no dot1x max-req
Parameter
Parameter
description
count
Default The default value is 3.
Command
Global configuration mode.
mode
Usage Use the show dot1x command to show the 802.1X
guidelines configuration.
Chapter 4 802.1X Configuration Commands
Description
Show the configuration about 802.1x
Description
Maximum number of authentication
requests sent to the server.