Ruijie Networks RG-S2600E Series Cli Reference Manual page 433

S2600E/P CLI Reference Guide
Usage
guidelines
Examples
Related
commands
1.1.20 ip igmp snooping tunnel
Configure the relationship between IGMP Snooping and QinQ:
ip igmp snooping tunnel
no ip igmp snooping tunnel
Parameter
description
Default
Command
mode
Usage
guidelines
Chapter 1 IGMP Snooping Commands
After you execute this command to enable the suppression
function, the switch begins to suppress the IGMP v1/v2
report messages.
The following example shows how to enable IGMP
snooping suppression on the device:
Ruijie(config)# ip igmp snooping suppression
N/A
Parameter
-
IGMP Passthrough is disabled.
Global configuration mode.
After IGMP Snooping is enabled and dot1q-tunnel
port is configured on the device, IGMP packets
received from dot1q-tunnel port will be handled in
two ways through IGMP Snooping:
1st way: Create multicast entries in the VLAN to
which the IMGP packets belong, and forward
IMGP packets in such VLAN.
For example: It is assumed that IGMP Snooping
has been enabled on the device; port A is a
dot1q-tunnel port; the default VLAN of port A is
VLAN 1, and packets from VLAN 1 and VLAN
10 can pass through port A. When multicast
Description
-