Ruijie Networks RG-S2600E Series Cli Reference Manual page 427

S2600E/P CLI Reference Guide
Related
commands
1.1.13 ip igmp snooping querier max-response-time
To configure the maximum response time advertised in query packets, execute
the global
max-resp
value.
ip igmp snooping querier max-response-time num
no ip igmp snooping querie
Parameter
description
De ault f
Command
mode
Usage
guidelines
Examples
Related
Command
ip igmp s nooping vlan querier
address
configuration command
onse-time". Use no form of this command to restore to the default
r max-respo
Parameter
num
Default value
Global configuration mode.
Configure this command to sp
response time to query packets.
By default, the maximum response time is 10 seconds. If
the maximum response time has been specified in the
corresponding VLAN, the value sp
used first.
The following example specifies the m
time to query pack s on the device:
Ruijie(config)#
max-response-time 15
Command
Chapter 1 IGMP Snooping Commands
Enable the sour
check in VLAN
of "ip igmp snooping
nse-time
Description
Maximum
time
second; default: 10
ecify the maximum
ecified in VLAN will be
aximum response
et
ip igmp snooping
Description
ce IP
querier
response
(1-25); un it:
querier
Description