Ruijie Networks RG-S2600E Series Cli Reference Manual page 730

S2600E CLI Reference Guide
Examples
Related
commands
10.4.2 debug ip dhcp snooping
Use this command to trun on the debugging switch of the DHCP snooping.
debug ip dhcp snooping
Default
Command
mode
Examples
10.4.3 renew ip dhcp snooping
database
When the DHCP Snooping function is enabled, use this command to import the information in
current flash to the DHCP Snooping binding database manually as needed.
renew ip dhcp snooping database
Parameter
description
Default
Chapter 10 DHCP Snooping Configuration Commands
The following example demonstrates how to clear the
dynamic database information from the DHCP snooping
binding database.
Ruijie# clear ip dhcp snooping binding
Ruijie# show ip dhcp snooping binding
Total number of bindings: 0
MacAddress IpAddress Lease(sec) Type VLAN Interface
---------- ---------- ---------- -------- ---- ---------
Command Description
show ip dhcp
Show the information of the DHCP
snooping
snooping binding database.
binding
Turned off
Privileged EXEC mode.
The following example demonstrates how to turn on the
debugging switch of the DHCP snooping.
Ruijie# debug ip dhcp snooping
Ruijie# show ip dhcp snooping binding
N/A.
N/A.