Ruijie Networks RG-S2600E Series Cli Reference Manual page 180

S2600E/P CLI Reference Guide
Usage
guidelines
Examples
Related
commands
9.1.6 voice vlan mac-address
Use this command to set the recognizable Voice VLAN OUI address. Use the
no form of this command to remove the OUI address.
voice vlan mac-address mac-addr mask oui-mask [description text]
no voice vlan mac-address mac-addr
Parameter
description
Default
Settings
Command
mode
Usage
guidelines
Chapter 9 Voice VLAN Configuration Commands
Use this command to enable the Voice VLAN on the
physical port only. The Voice VLAN can be enabled on the
Access Port、Trunk Port、Hybrid Port、Private VLAN host
port、Private VLAN promiscuous port and Uplink port on
the Ruijie products.

Note
With the global Voice VLAN disabled, although the Voice
VLAN can be enabled on the port, it is invalid.
The following example shows how to enable the Voice
VLAN function on the interface FastEthernet 0/1:
Ruijie(config)# interface fastEthernet 0/1
Ruijie(config-if)# voice vlan enable
Command
show voice vlan
Parameter
mac-addr
oui-mask
text
By default, no OUI has been configured.
Global configuration mode.
Use this command to identify the voice packets from
different manufacturers. The first three bytes of the MAC
Description
Show Voice VLAN configurations
and the current state.
Description
In the format of H.H.H. The source
MAC address for the voice packets.
In the format of H.H.H. The valid
length for the OUI address.
The description for the OUI address.