Ruijie Networks RG-S2600E Series Cli Reference Manual page 848

S2600E CLI Reference Guide
Related
commands
Chapter 15 NFPP Configuration Commands
15
Gi 0/1 Enable 180
-
Gi 0/2 Disable 200
20
Maximum count of monitored hosts: 1000
Monitor period：300s
Field Description
Interface(Global) Global configuration
Status Enable/Disable the anti-attack
function.
Rate-limit In the format of the rate-limit
threshold for the source IP address/
the rate-limit threshold for the
source MAC address/ the rate-limit
threshold for the port
Attack-threshold In the same format as the rate-limit.
- No configuration.
Command
arp-guard
attack-threshold
arp-guard enable
arp-guard
isolate-period
arp-guard
monitor-period
arp-guard
monitored-host-li
mit
arp-guard
rate-limit
arp-guard
scan-threshold
nfpp arp-guard
enable
5/-/-
4/5/60
Description
Set the global attack threshold.
Enable the anti-ARP
function.
Set the global isolate time.
Set the monitor period.
Set the maximum number of the
monitored hosts.
Set the global rate-limit threshold.
Set the global scan threshold.
Enable the anti-ARP attack function
on the interface.
8/-/-
8/10/100
attack