Dot1X Authentication - Ruijie Networks RG-S2600E Series Cli Reference Manual

S2600E CLI Reference Guide
commands
show dot1x
4.5 Other dot1x Configuration
Commands
4.5.1

dot1x authentication

In case the AAA is enabled, the authentication with the AAA server must be performed for
logon. Use this command to associate logon authentication method list. The no form of this
command is used to delete the logon authentication method list.
dot1x authentication {default | list-name}
no dot1x authentication {default | list-name}
Parameter
Parameter
default
description
list-name
If AAA is enabled, the AAA service is used for login
Default
authentication by default.
Command
Interface configuration mode.
mode
If the AAA security server is enabled, this command is
Usage
used for the login authentication with the specified method
guidelines
list.
The following command demonstrates how to associate a
method list on the interface and use group radius for
authentication.
Ruijie# configure terminal
Ruijie(config)# aaa new-model
Examples
Ruijie(config)# aaa authentication dot1x default group
radius
Ruijie(config)# interface fastEthernet0/1
Ruijie(config-if)# dot1x authentication default
Ruijie(config-if)# end
Ruijie#
Chapter 4 802.1X Configuration Commands
Show the 802.1x configurations.
Description
Name of the default authentication
method list
Name of the method list available