Ipv6 Redirects - Ruijie Networks RG-S2600E Series Cli Reference Manual

S2600E/P CLI Reference Guide
Command
mode
Usage
guidelines
Examples
3.1.19

ipv6 redirects

Use this command to control whether to send ICMPv6 redirect message when
the switch receives and forwards an IPv6 packet through an interface. Use the
no form of this command to disable the function.
ipv6 redirects
no ipv6 redirects
Default
configuration
Command
mode
Usage
guidelines
Examples
Related
commands
3.1.20 ipv6 source-route
Use this command to forward the IPv6 packet with route header. The no form of
this command disables the forwarding.
ipv6 source-route
no ipv6 source-route
Chapter 3 IPv6 Configuration Commands
Global configuration mode.
None.
Ruijie(config)# no ipv6 ns-linklocal-src
The ICMPv6 redirect message is permitted to be sent on
the IPV6 interface.
Interface configuration mode.
The transmission rate of any ICMPv6 error message is
limited. By default, it is 10pps.
Ruijie(config-if)# ipv6 redirects
Command Description
show ipv6
Show the interface information.
interface