Link State Group - Ruijie Networks RG-S2600E Series Cli Reference Manual

S2600E CLI Reference Guide
commands
1.1.2

link state group

Use this command to add the port into the specified link state track group. The
no form of this command is used to delete a port from the specified link state
track group.
link state group num {upstream | downstream}
no link state group
Parameter
description
Default
Command
mode
Usage
guidelines
Examples
Related
commands
Chapter 1 REUP Configuration Commands
Add the port to the specified link state
link state
track group.
group
Parameter Description
num ID of the link state track group.
Configure the port to be an upstream
upstream
port in the link state track group.
Configures the port to be a downstream
downstream
port in the link state track group.
The port is not added into any link state track group.
Interface configuration mode.
First create a link state track group and then add a port into
the specified link state track group.
The following example shows how to add the port fa0/2
into the link state track group:
Ruijie(config)# link state track 1
Ruijie(config)# interface fa 0/2
Ruijie(config-if)# link state group 1 upstream
Command Description
link state track Enable a link state track group.