Ruijie Networks RG-S2600E Series Cli Reference Manual page 622

S2600E CLI Reference Guide
Default
Configuration
Command
Mode
Use Guide
Configuration
Example
Related
Commands
Platform
Description
Chapter 5 Web Authentication Configuration Commands
ip-mask
arp
No network resource without authentication is set.
Global configuration mode
When Web authentication is enabled, all users must pass Web
authentication to access network resources. This command is
used to make certain network resources available to
unauthenticated users. All users can access the Web sites free
of authentication.
Up to 50 network resource ranges can be free of
authentication.
Example 1: Set the Web site with the IP address as 172.16.0.1
free of authentication.
Ruijie(config)# http redirect direct-site 172.16.0.1
Command
show http redirect
None
IPv4 address mask of the network
resource free of
(optional)
If the ARP CHECK is enabled on the
access device, the keyword arp is
needed for ARP binding of the
network resources
authentication (optional).
necessary for IPv4
resources only.
Description
View the HTTP
configuration.
authentication
free of
It is
network
redirection