Ipv6 Verify Source - Ruijie Networks RG-S2600E Series Cli Reference Manual

S2600E CLI Reference Guide
Default
Command
mode
Usage
guidelines
Examples
Related
commands
Platform
description
13.1.15

ipv6 verify source

Use this command to set the address binding on the interface. Use the no form of this
command to disable the address binding.
ipv6 verify source [port-security]
no ipv6 verify source
Parameter
description
Chapter 13 DHCPv6 Snooping Configuration Commands
N/A.
Global configuration mode.
For the users using the static IPv6 address but not
obtaining the IPv6 address through the DHCPv6
interaction, the administrator can add the static binding
entry manually to enable the address binding on the port.
The following example shows how to add the static binding
entry manually.
Ruijie(config)# ipv6 source binding 00d0.f866.4777 vlan
10 2001:2002::2003 interface fastethernet 0/10
Command Description
show ipv6 View all munually-added static binding
source entries and DHCPv6 snooping dynamic
binding binding entries.
This command is supported on all switches.
Parameter
port-security
binding only.
Description
Set the MAC address+IPV6
address filtering mode. Without
this parameter, set the IPV6
address filtering mode only.