Ruijie Networks RG-S2600E Series Cli Reference Manual page 941

S2600E CLI Reference Guide
Related
commands
Platform
description
2.2.6 service-policy
Use this command to apply the policy map on the interface or the virtual-group.
service-policy {input | output} policy-map-name
no service-policy {input | output}
Parameter
description
Command
mode
Examples
Related
commands
Platform
description
2.2.7 priority-queue
Use this command to configure the output queue scheduling algorithm.
priority-queue
[no] priority-queue
Chapter 2 QoS Configuration Command
show policy-map
-
Parameter Description
policy-map-name Name of the created policy map
Cancel the application of the policy
no map
virtual-group.
Interface configuration
configuration mode.
Ruijie(config)# interface fastEthernet 0/1
Ruijie(config-if)# service-policy input po
Ruijie(config)# virtual-group 3
Ruijie(config-if)# service-policy input po
show mls qos interface.
The parameter output
virtual-group.
on the interface
mode, and virtual-group
is not supported
or the
in the