Ruijie Networks RG-S2600E Series Cli Reference Manual page 680

S2600E CLI Reference Guide
Default
configuration
Command
mode
Usage
guidelines
Examples
Related
commands
7.2 Showing Related
Commands
7.2.1 show nac-author-user
Use this command to show the limited and bound number of IP address on the port.
show nac-auth-user
Parameter
description
Default
configuration
Command
mode
Chapter 7 Port-based Flow Control Configuration Commands
Disabled.
Interface configuration mode.
If the limited number of the IP address you set is less than bound
number, it will prompt this setting fails.
The example below describes how to set the limited number of the
port IP address as 100
Ruijie(config)#inter f 0/1
Ruijie(config-if)#nac-author-user maximum 100
Command
show nac-author-user
Parameter
-
All information is shown by default.
Privileged mode.
Description
Show the limited and
bound number of IP
address on the port.
Description
-