Ruijie Networks RG-S2600E Series Cli Reference Manual page 392

S2600E CLI Reference Guide
4.1.2 sntp interval
Use this command to set the interval for the SNTP Client to synchronize its
clock with the NTP/SNTP Server.
sntp interva seconds
no sntp interval
Parameter
description
Default
configuration
Command
mode
Usage
guidelines
Examples
Related
commands
Platform
description
Chapter 4 SNTP Configuration Commands
Parameter Description
Synchronization interval in 60 to 65535
seconds
seconds
1800s
Global configuration mode.
The show sntp command shows the parameters of SNTP.
Note that the set interval will not take
effect immediately. To this end, execute
the sntp enable command after setting
Caution
the interval.
Ruijie(config)# sntp interval 3600
Command Description
sntp enable Enable SNTP.
show sntp Show the SNTP configuration.
Synchronizes the software clock with
clock
the hardware clock.
update-calendar
N/A