Ruijie Networks RG-S2600E Series Cli Reference Manual page 567

Table of Contents

Advertisement

S2600E CLI Reference Guide
Command
aaa new-model
Related
aaa
commands
authentication
dot1x
4.5.2
dot1x auth-address-table
Use this command to set the IP address list that 802.1X authentication allows. Use the no form
of the command to remove the allowed IP address list.
dot1x auth-address-table address mac-addr interface interface
no dot1x auth-address-table address mac-addr interface interface
Parameter
Parameter
mac-addr
description
interface
Default
N/A.
Command
Global configuration mode.
mode
Only the IP address in this list can be authenticated by
Usage
802.1X. Use show dot1x auth-address table command
guidelines
to show the authentication address list.
The following example demonstrates how to add an
authentication address on the interface.
Ruijie# configure terminal
Examples
Ruijie(config)# dot1x auth-address-table address
00d0f8000000 interface ehternet 1/1
Ruijie(config)# end
Ruijie#
Command
Related
show dot1x
commands
auth-address-table
Chapter 4 802.1X Configuration Commands
Description
Enable the AAA security service.
Configure the logon authentication
method list.
Description
Physical IP address that can be
authenticated.
Interface number.
Description
Show the information about the IP
address list that the 802.1x can
authenticate.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RG-S2600E Series and is the answer not in the manual?

Table of Contents