Ruijie Networks RG-S2600E Series Cli Reference Manual page 559

S2600E CLI Reference Guide
Command
Related
commands
show dot1x
4.2.4 dot1x timeout
supp-timeout
Use this command to set the authentication timeout between the device and the supplicant.
Use the no form of the command to restore it to the default setting.
dot1x timeout supp-timeout seconds
no dot1x timeout supp-timeout
Parameter
Parameter
description
seconds
Default 3 seconds.
Command
mode Global configuration mode.
Usage
guidelines Use show dot1x command to show 802.1X configuration.
The following example sets the authentication timeout
between the device and the supplicant to 10s:
Ruijie# configure terminal
Ruijie(config)# dot1x timeout supp-timeout 10
Ruijie(config)# end
Ruijie# show dot1x
802.1X Status:
Authentication Mode:
Authed User Number:
Examples
Re-authen Enabled:
Re-authen Period:
Quiet Timer Period:
Tx Timer Period:
Supplicant Timeout:
Server Timeout:
Re-authen Max:
Maximum Request:
Filter Non-RG Supp:
Chapter 4 802.1X Configuration Commands
Description
Show the information about 802.1x.
Description
Authentication timeout between the
device and the supplicant The range is
from 0 to 65535 seconds.
Enabled
EAP-MD5
0
Disabled
1000 sec
1000 sec
3 sec
10 sec
10 sec
3 times
3 times
Disabled