Ruijie Networks RG-S2600E Series Cli Reference Manual page 682

S2600E CLI Reference Guide
Related
commands
7.2.3 show storm-control
Use this command to show storm suppression information.
show storm-control [interface-id]
Parameter
description
Default
configuration
Command
mode
Examples
Related
commands
7.3 Configuration Example
Showing Commands
7.3.1 protected-ports help
Use this command to show the typical configuration of protected-ports modules.
protected-ports help
Chapter 7 Port-based Flow Control Configuration Commands
Command
switchport port-security
switchport port-security
aging
switchport port-security
mac-address
Parameter
interface-id
All information is displayed.
Privileged mode.
Ruijie# show storm-control gigabitethernet 1/1
Interface Broadcast Control Multicast Control Unicast
Control
----------- --------------- ----------------
---------------
Gi1/1 Disabled Disabled Disabled
Command
storm-control
Description
Enable port security and configure
the way to deal with violation.
Specify the aging time fpr the
secure address on the interface.
Configure the
table.
Description
Interface on which the storm suppression
is enabled
Description
Enable storm suppression.
secure address