Ruijie Networks RG-S2600E Series Cli Reference Manual page 822

S2600E CLI Reference Guide
15.6 ND-guard Configuration
Commands
The ND-guard configuration commands include:
15.6.1 nd-guard attack-threshold
Use this command to set the global attack threshold. When the packet rate exceeds the attack
threshold, the attack occurs.
nd-guard attack-threshold per-port{ ns-na | rs | ra-redirect } pps
Parameter
description
Default
Settings
Command
mode
Usage
guidelines
Examples
Chapter 15 NFPP Configuration Commands
clear nfpp
icmp-guard hosts
Parameter Description
Set
ns-na
neighbor advertisement.
rs Set the router request.
Set the router advertisement and the
ra-redirect
redirect packets.
Set the attack threshold, in pps. The
pps
valid range is [1,9999].
By default, the default attack threshold for the ns-na, rs and
ra-redirect on each port is 30.
NFPP configuration mode.
The attack threshold shall be equal to or larger than the
rate-limit threshold.
Ruijie(config)# nfpp
Ruijie(config-nfpp)# nd-guard attack-threshold per-por
t ns-na 20
Ruijie(config-nfpp)# nd-guard attack-threshold per-por
t rs 10
Ruijie(config-nfpp)# nd-guard attack-threshold per-port
ra-redirect 10
Clear the isolated host.
the neighbor request and