Ruijie Networks RG-S2600E Series Cli Reference Manual page 528

S2600E CLI Reference Guide
Ruijie(config)# ip radius source-interface fastEthernet
0/0
Command
radius-server
Related
host
commands
ip address
2.1.2 radius-server attribute 31
Use this command to specify the MAC-based format of RADIUS Calling-Station-ID attribute in
the global configuration mode. Use the no form of this command to restore to the default
value.
radius-server attribute 31 mac format {ietf | normal | unformatted}
no radius-server attribute 31 mac format
Parameter
ietf
Parameter
normal
description
unformatted
Default The default format is unformatted.
Command
mode Global configuration mode.
Some RADIUS security servers(mainly used to 802.1x
Usage authentication) may identify the IETF format only. In this
case, the RADIUS Calling-Station-ID attribute shall be set
guidelines
as the IETF format type.
Chapter 2 RADIUS Configuration Commands
Description
Define the RADIUS server.
Configure the IP address of the
interface.
Description
The standard format specified by the
IETF（RFC3580）. '-'is used as the
seperator,
00-D0-F8-33-22-AC.
Normal format representing the MAC
address. '.'is used as the seperator.
For example: 00d0.f833.22ac.
No format and seperator. By default,
unformatted is used. For example:
00d0f83322ac.
for example: