Ruijie Networks RG-S2600E Series Cli Reference Manual page 813

S2600E CLI Reference Guide
15.5.2 icmp-guard enable
Use this command to enable the ICMP anti-attack function.
icmp-guard enable
Parameter
description
Default
Settings
Command
mode
Usage
guidelines
Examples
Related
commands
15.5.3 icmp-guard isolate-period
Use this command to set the isolate time globally.
icmp-guard isolate-period {seconds | permanent}
Parameter
description
Chapter 15 NFPP Configuration Commands
clear nfpp icmp-guard
hosts
Parameter Description
-
-
Enabled
NFPP configuration mode.
N/A
Ruijie(config)# nfpp
Ruijie(config-nfpp)# icmp-guard enable
Command
nffp icmp-guard enable
show nfpp icmp-guard
summary
Parameter Description
seconds
Set the isolate time, in seconds. The
valid range is 0, or [30, 86400].
Clear the monitored host.
Description
Enable the ICMP anti-attack
function on the interface.
Show the configurations.