Ruijie Networks RG-S2600E Series Cli Reference Manual page 904

S2600E CLI Reference Guide
1.1.10 lmac access-group
Use this command to apply the specified MAC ACL on the specified interface.
Use the no form of the command to remove the application.
mac access-group {id|name}{in|out}
no mac access-group {id|name}{in|out}
Parameter
description
Default
configuration
Command
mode
Usage
guidelines
Examples
Related
commands
Platform
description
Chapter 1 ACL Configuration Commands
Parameter Description
ID of the MAC ACL (700 to 799)
id
Name of the MAC ACL
name
Filter the incoming packets of the
in
interface
Filter the outgoing packets of the
out
interface
No ACL is applied on the interface.
Interface configuration mode.
You can use the show running-config command to show
the configuration result.
The following example shows how to apply the access-list
accept_00d0f8xxxxxx only to Gigabit interface 1:
Ruijie(config)#interface GigaEthernet 1/1
Ruijie(config-if)#mac access-group
accept__00d0f8xxxxxx_only in
Command Description
Show the ACL configuration.
show
access-group
-