Ruijie Networks RG-S2600E Series Cli Reference Manual page 621

S2600E CLI Reference Guide
Configuration
Example
Related
Commands
Platform
Description
5.1.2 http redirect direct-site
This command is used to set the range of network resources without
authentication. The no form of this command is used to delete the range.
http redirect direct-site { ipv6-address | ipv6-prefix/prefix-length |
ip-address [ip-mask] [arp] }
no http redirect direct-site { ipv6-address | ip-address [ip-mask] }
Parameter
Description
Chapter 5 Web Authentication Configuration Commands
address and one IPv6 address can be configured for HTTP
redirection. The IP address for special access of the HTTP
redirection is a network resource of free-authentication, which is
also available to unauthenticated users. To prevent attacks,
however, the access device restricts users' access to this IP
address. The upper limit is in direct ratio with the physical ports of
the access device.
Example 1: Set the IP address for special access of the HTTP
redirection to 172.16.0.1.
Ruijie(config)# http redirect 172.16.0.1
Command
show http redirect
http redirect homepage
None
Parameter
ipv6-address
ipv6-prefix/prefix-lengt
h
ip-address
Description
View the HTTP
configuration.
Set the address of the authentication
homepage.
Description
IPv6 address of the network resource
without authentication.
IPv6 address prefix and prefix length.
Access to the network resources in
the range can
authentication.
IPv4 address of the network resource
free of authentication.
redirection
be free of